Please note: This firmware just suit for Belsee Android head unit, doesn't for other. If your car stereo doesn't buy it from belsee and still update it, and caused the problem like radio is dead, we will not take any responsibility.

If you are Belsee customers, please contact to us before upgrade your android system.

This Firmware just for SKU: BU8, 12.8" PX6 Android 8.1 system tesla screen from belsee:

Update on 9-20-2019 for 12.8" screen radio.

PX6 zip file: http://www.mediafire.com/file/vtrzllpks2wsjk1/px6-9-20.zip/file

And MCU file http://www.mediafire.com/file/j8hfxqeeovr68xw/RL7A.bin/file

And unzip it, and copy the files(RL7A.bin and unzip files from PX6.zip) into USB driver, then connect to usb cable of radio to update.

If your car have android auto carplay app Zlink, please download it from your computer and install it by this page http://www.mediafire.com/file/abgp6e245yte9vn/zlink-wla-a-zhuoxw-release-v3.3.15_jg.apk/file

 


Please download 2 files from your computer by this link:

px6.zip  http://www.mediafire.com/file/0adawi1p5yu7xgg/px6.zip/file
 
and RL7A.bin  http://www.mediafire.com/file/j8hfxqeeovr68xw/RL7A.bin/file
And unzip it, and copy the files(RL7A.bin and unzip files from PX6.zip) into USB driver, then connect to usb cable of radio to update.

 


This Firmware just for new android 9.0 system from belsee:

Please download android 9.0 latest firmware from your computer,  
Then unzip the file, you will get kupdate and update2.bin, please copy this 2 files into USB driver with out any folder.
Please note, If your head unit have DSP, please download update2.bin by this page:http://www.mediafire.com/file/mx0kau167g61vw4/update2.bin/file .
If your head unit have NOT DSP, please download update2.bin by this page: http://www.mediafire.com/file/4k97ett3tcr61ff/update2.bin/file .
check this video for full screen https://www.youtube.com/watch?v=CtkQR6FeUwQ or buttons https://www.youtube.com/watch?v=ZNwyjz4Ay_o
to update your system.

Note:  If your head unit screen separate from head unit. like Malibu, Kuga/ C-Max...

Please check this https://youtu.be/aXryB9d7GxE video to set the  Split type, screen with the head unit.

Please go into factory setting and enter the 126 password and select the 1st Bluetooth option and restart the Head Unit. If your Bluetooth no work, there is no name and pin number.


 

This Firmware just for old android 8.0 system.

Download the latest firmware on this link

Do NOT unzip it and copy the update file to the USB driver without any folders.
Then connect the USB cable, the head unit will detect the update software and display the information on the screen.
Choose to erase all the data and format the flash, then install it.

Here is a YouTube video: 

Belsee can always service and support our customers. Any more questions or problems will offer solutions.

If you have more questions please contact to us by belsee.com
Official Facebook: https://www.facebook.com/Belsee-617677568570975/
Official YouTube: https://www.youtube.com/channel/UC6bnEXjRqt9MFRg4lWP6pRg