How to upgrade aftermarket android head unit for your toyota corolla 2014 2015?

Usually toyota corolla's car has left and right driving, so you need to buy correct navigation system for your car.
Left Driving:

Right Driving:
Please note before removing and installing:
1. Please pull out your car key and off the car.
2. Prepare installation tools and electronic insulation tape.


3. Make sure the car battery is full. Because the new car stereo requires 12 Volts. The navigation system doesn't turn on if your car doesn't have enough 12volts.
4. The wires must be connected and covered with electronic insulation tape. Make sure not loose during the installation.
...

 2014 2015 Toyota Corolla car navigation system installation guide:
1. Pry open the trim panel with the installation tool.


2. Remove the original car CD around the panel.


 3. Unplug the connectors.


 4. Remove 4 screws from the original CD player.


 5. Remove the original car CD and disconnect the connector.


 6.Check all Belsee accessories of new car radio and connect. You need to connect power cable, GPS antenna, original radio antenna, back up camera wire, USB cable and so on.
Put the GPS antenna on front of windshield.


 7. Put the car key, the head unit will be turn on and test the GPS maps, Radio app music and other functions
8. Put the everything into original place if head unit goes well.

 Recommend belsee special android car radio for toyota corolla 2014 2015.
That head unit running latest android 8.0 oreo system, Rockchip PX5 CPU Octa Core, Ram 4GB Rom 32GB. Built-in Google maps navigations system, support steering wheel control, back up camera, bluetooth for free phone calls, mirror link, built-in wifi, 3G 4G wifi hotspot from your phone and so on.

 If you have any more questions please contact us www.belsee.com