How to upgrade Aftermarket android head unit for your Honda CR-V 2006 2007 2008 2009 2010 2011?

 If you want to install standard double din, you need buy dash facia kit and special Honda crv harness.
 This is factory radio:

 HONDA CR-V 2006-2011 dashboard

Please note before removing and installing:
1. Please pull out your car key and off the car.
2. Prepare installation tools, cross screwdriver, and electronic insulation tape.
3. Make sure the car battery is full. Because the new car stereo requires 12 Volts. The navigation system doesn't turn on if your car doesn't have enough 12volts.
4. The wires must be connected and covered with electronic insulation tape. Make sure not loose during the installation.
Honda CR-V 2006-2011 radio removal and installation guide:
Dismantle the center console:

Disconnect this plug

Disconnect connector 
Unscrew the screw
Take out original radio and disconnect plugs
take out original holder

Check all Belsee accessories of new car stereo and connect. You need to connect power cable, GPS antenna, original radio antenna, back up camera wire, USB cable and so on.
Put the GPS antenna on front of windshield.

Put the car key, the head unit will be turn on and test the GPS maps, Radio app music and other functions

 Put the everything into original place if head unit goes well.

Do It Yourself Honda CR-V 2006-2011 Remove and Replace Belsee Android Head Unit.

Recommend belsee special android head unit for Honda CR-V 2006-2011.

That head unit running latest android 8.0 oreo system, Rockchip PX5 CPU Octa Core, Ram 4GB Rom 32GB. Built-in Google maps navigations system, support steering wheel control, back up camera, bluetooth for free phone calls, mirror link, built-in wifi, 3G 4G wifi hotspot from your phone and so on.

If you have any more questions please contact us